Fichier:Sea-level variations from Sentinel-3A ESA359994.jpg
Fichier d’origine (1 173 × 870 pixels, taille du fichier : 996 kio, type MIME : image/jpeg)
Ce fichier et sa description proviennent de Wikimedia Commons.
Description
DescriptionSea-level variations from Sentinel-3A ESA359994.jpg |
English: Presented this week at ESA’s Living Planet Symposium in the Czech Republic, this new map shows a month of ‘sea-level anomaly’ measurements from Sentinel-3A. The satellite has only been in orbit since 16 February 2016 and is therefore still being commissioned for service. Nevertheless, measurements made by its radar altimeter between 3 March and 2 April have been used to create this map, which shows differences in sea-surface height compared to the mean.
Sea-level anomaly is the most basic altimeter data product. Red (positive) areas show where the sea surface is higher than the reference sea level and blue (negative) areas show where it is lower. Positive anomalies are associated with warmer waters and a deeper ‘thermocline’ and negative anomalies are associated with cooler waters and a shallower ‘thermocline’ – the transition layer between warmer mixed water at the ocean's surface and cooler deep water below. The plot at the base of the sea-level anomaly map shows the normalised distribution of data, indicating a global mean of 7 cm and a standard deviation of 11 cm. Using local sea-level variations measured by Sentinel-3’s altimeter and comparing them to a reference level, major ocean currents can be computed and mapped. Mesoscale eddy systems are clearly shown on the map as more intense blue and red patterns – effectively local hills and valleys in the sea surface. These are associated with the strong western boundary currents of the Gulf Stream in the North Atlantic, the Brazil current confluence with the Falklands current in the southeast Atlantic, the Benguela current off South Africa and the Kurishio current east of Japan. Strong positive variability is also seen in the equatorial Pacific Ocean associated with oceanic tropical instability waves generated by instabilities within the equatorial currents themselves. The Sentinel-3A radar altimeter will also measure significant wave height and provide estimates of surface wind speeds over the ocean, which is important information for ocean and wave forecasting systems operated by the Copernicus Marine Environmental Monitoring Service. The radar altimeter data in this map were processed using France’s CNES space agency’s processing prototype (S3PP), with ESA level-0 data as input. A wet tropospheric correction was derived from European Centre for Medium-Range Weather Forecasts’ models. |
Date | |
Source | http://www.esa.int/spaceinimages/Images/2016/05/Sea-level_variations_from_Sentinel-3A |
Auteur | European Space Agency |
Autorisation (Réutilisation de ce fichier) |
contains modified Copernicus Sentinel data (2016), processed by ESA and CNES,CC BY-SA 3.0 IGO |
Autres versions |
|
Title InfoField | Sea-level variations from Sentinel-3A |
Set InfoField | Living Planet Symposium 2016 |
Mission InfoField | Sentinel-3 |
Activity InfoField | Observing the Earth |
Conditions d’utilisation
- Vous êtes libre :
- de partager – de copier, distribuer et transmettre cette œuvre
- d’adapter – de modifier cette œuvre
- Sous les conditions suivantes :
- paternité – Vous devez donner les informations appropriées concernant l'auteur, fournir un lien vers la licence et indiquer si des modifications ont été faites. Vous pouvez faire cela par tout moyen raisonnable, mais en aucune façon suggérant que l’auteur vous soutient ou approuve l’utilisation que vous en faites.
- partage à l’identique – Si vous modifiez, transformez, ou vous basez sur cette œuvre, vous devez distribuer votre contribution sous la même licence ou une licence compatible avec celle de l’original.
This image contains data from a satellite in the Copernicus Programme, such as Sentinel-1, Sentinel-2 or Sentinel-3. Attribution is required when using this image.
Attribution: Contains modified Copernicus Sentinel data {{{year}}}
Attribution
The use of Copernicus Sentinel Data is regulated under EU law (Commission Delegated Regulation (EU) No 1159/2013 and Regulation (EU) No 377/2014). Relevant excerpts:
Free access shall be given to GMES dedicated data [...] made available through GMES dissemination platforms [...].
Access to GMES dedicated data [...] shall be given for the purpose of the following use in so far as it is lawful:
GMES dedicated data [...] may be used worldwide without limitations in time.
GMES dedicated data and GMES service information are provided to users without any express or implied warranty, including as regards quality and suitability for any purpose. |
Attribution
Éléments décrits dans ce fichier
dépeint
10 mai 2016
Historique du fichier
Cliquer sur une date et heure pour voir le fichier tel qu'il était à ce moment-là.
Date et heure | Vignette | Dimensions | Utilisateur | Commentaire | |
---|---|---|---|---|---|
actuel | 7 mai 2017 à 15:27 | 1 173 × 870 (996 kio) | Fæ | European Space Agency, Id 359994, http://www.esa.int/spaceinimages/Images/2016/05/Sea-level_variations_from_Sentinel-3A, User:Fæ/Project_list/ESA |
Utilisation du fichier
La page suivante utilise ce fichier :
Usage global du fichier
Les autres wikis suivants utilisent ce fichier :
- Utilisation sur en.wikipedia.org
- Utilisation sur www.wikidata.org
Métadonnées
Ce fichier contient des informations supplémentaires, probablement ajoutées par l'appareil photo numérique ou le numériseur utilisé pour le créer.
Si le fichier a été modifié depuis son état original, certains détails peuvent ne pas refléter entièrement l'image modifiée.
Logiciel utilisé | Adobe Photoshop CC 2015 Macintosh |
---|